Bumpers Page-Front


The Rubicon Series Front Bumpers for CJ, YJ and TJ are available in several different lengths and configurations to suit your application. Each bumper is constructed of 3/16" steel and features a 45 degree angled underside for increased approach angle as well as a recessed winch deck that reduces radiator obstruction and lowers center of gravity. All bumpers install using factory holes and include adequate mounting hardware. Clevis mounts are standard. All bumpers are shipped bare steel, no paint or powdercoat. Additional specifications are listed at the bottom of this page.

Jeep CJ - Rubicon Series Front Bumpers


	Rubicon 52" Bumper Only Made in U.S.A. Part # 4WD-JR51102-CJ

	Rubicon 52" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR51202-CJ

	Rubicon 60" Bumper Only Made in U.S.A. Part # 4WD-JR61102-CJ

	Rubicon 60" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR61202-CJ

	Rubicon 60" Bumper with Prerunner and Fender Bars Made in U.S.A. Part # 4WD-JR61302-CJ

	Rubicon 60" Bumper with Prerunner Bars Made in U.S.A. Part # 4WD-JR61402-CJ

Optional Components: Part # 4WD-W8274 - Warn 8274 Mount, 4.5" X 10" pattern for four 3/8" bolts with 2 more holes spread 17" Made in U.S.A. Part # 4WD-W9500 - Fairlead Mount, Fits any planetary winch up to 9500 lbs. with 4.5" X 10" bolt pattern. Made in U.S.A. Order a fairlead mount with your bumper to get a better price!!

Jeep YJ - Rubicon Series Front Bumpers
	Rubicon 52" Bumper Only Made in U.S.A. Part # 4WD-JR51102

	Rubicon 52" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR51202

	Rubicon 60" Bumper Only Made in U.S.A. Part # 4WD-JR61102

	Rubicon 60" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR61202

	Rubicon 60" Bumper with Prerunner and Fender Bars Made in U.S.A. Part # 4WD-JR61302

	Rubicon 60" Bumper with Prerunner Hoop Made in U.S.A. Part # 4WD-JR61402

Optional Components: Part # 4WD-W8274 - Warn 8274 Mount, 4.5" X 10" pattern for four 3/8" bolts with 2 more holes spread 17" Made in U.S.A. Part # 4WD-W9500 - Fairlead Mount, Fits any planetary winch up to 9500 lbs. with 4.5" X 10" bolt pattern. Made in U.S.A. Order a fairlead mount with your bumper to get a better price!!

Jeep TJ - Rubicon Series Front Bumpers


	Rubicon 52" Bumper Only Made in U.S.A. Part # 4WD-JR51102

	Rubicon 52" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR51202

	Rubicon 60" Bumper Only Made in U.S.A. Part # 4WD-JR61102

	Rubicon 60" Bumper with Winch Bar Made in U.S.A. Part # 4WD-JR61202

	Rubicon 60" Bumper with Prerunner and Fender Bars Made in U.S.A. Part # 4WD-JR61302

	Rubicon 60" Bumper with Prerunner Hoop Made in U.S.A. Part # 4WD-JR61402

Jeep XJ - Rubicon Series Front Bumpers
Constructed of 3/16" Steel. Attaches through the six stock holes in the unibody rails. (frame) Heavy -duty clevis tabs are standard. All bumpers are shipped bare steel with no paint or powdercoat.

	The Basic Front Bumper for XJ Cherokee. Includes winch mounting holes. Fairlead mount or 8274 Mount required for winch installation. Made in U.S.A. Part # 4WD-JX84-1102 (Bumper only)

	The same Basic Bumper with winch guard. The winch bar is the same radius as the Prerunner Hoop but with less overall height. Made in U.S.A. Part # 4WD-JX84-1202 (Bumper with winch guard)

	The same Basic Bumper with the Prerunner Bars. Made in U.S.A. Part # 4WD-JX84-1402 (Bumper with Prerunner Bars)

	The same Basic Bumper with the Grill Guard. (Shown with optional Headlight Bars) Part # 4WD-JX84-1502 (Bumper with Grill Guard only) Made in U.S.A. Part # 4WD-JX84-1702(Bumper with Grill Guard and Headlight Bars - pictured at left)

Optional Components: Part # 4WD-W8274 - Warn 8274 Mount, 4.5" X 10" pattern for four 3/8" bolts with 2 more holes spread 17" Made in U.S.A. Part # 4WD-W9500 - Fairlead Mount, Fits any planetary winch up to 9500 lbs. with 4.5" X 10" bolt pattern Made in U.S.A. Order a fairlead mount with your bumper to get a better price!!

Additional Design Features: The 45% form on the underside of each bumper allows for greater approach and departure angles. This design also allows the winch to drop 2” lower into the bumper to assist in radiator air flow and lower center of gravity. The dropped winch deck has a recess built into it to accommodate the cooling fins and longer motor of the Warn HS9500i and 9500Ti. The bumpers will accept Ramsey, Milemarker and Superwinch and other Warns of the 9500 lb. class or smaller that have a 41/2” x 10” bolt pattern to match the pre-cut holes in the bumper. A Fairlead mount will be needed to utilize the hawse or rollers that come with the winch. For upright Warn winches, the 8274 WM will be necessary.
Construction: Main Bumper Form: 3/16” Hot Rolled Steel Mounts: ¼” Hot Rolled Steel Winch Deck: ¼” Hot Rolled Steel Clevis Tabs: 1” Hot Rolled Steel Fairlead and Winch Mounts: ¼” Hot Rolled Steel Winch Bar Tube 1 ¾” x .120 HREW Tube






	Copyright 4WD Products 2004