Comp Home

Select a Compressor or Scroll Down for more Information

Vertical Position

Horizontal Position

MaxAIR 4.0 - Hardmount Compressor

Our MaxAIR 4.0 is packed with performance! Features include:

4.0 CFM flow @ 0 PSI - FAST!
100% Duty @ 100 PSI- RELIABLE!
150 PSI Maximum Pressure - HIGH PRESSURE!
Fan-cooled - LOW TEMP!
Now includes Relay & Circuit Breaker - EASY INSTALLATION!
3/4 Horsepower Permanent Magnet Motor - STRONG!
Oil-less Design - MOUNT IN ANY POSITION
30 Amp Draw @ 35 PSI, 40 Amps @ 150 PSI
Weight: 17 lbs.
Dimensions: 14.25" X 8.75" X 6.0"
1 Year Limited Warranty - Completely Rebuildable
Sealed Motor resists Dust & Moisture
Includes complete Use and Installation Manual

The MaxAIR 4.0 can be rotated in it's integral mounting bracket, creating a lower profile for easier mounting in your vehicle.

Use this compressor with or without an air tank. These are suitable for mounting inside the vehicle or under the hood. The location you choose should not be subject to submersion. Mounting underneath the vehicle is not recommended.

PART # MX402

Click to view the installation diagram for a system including a tank

Recommended Accessories for MaxAIR 4.0 Hardmount:

Braided Steel Leader Hose - Reduces outlet temperature preventing melting of nylon filler hose or plumbing. PART # LH001
3/8" Check Valve - Prevents backflow through compressor. Recommended for all applications using a tank. PART # CV001
Pressure Switch - Turns off the compressor when tank or line pressure reaches a set pressure. Recommended for all applications using a tank. PART # PS135
Tank Installation Kit - Includes all of the parts required to properly set up your on-board air system. (Tank not included) Coming Soon!
Remote Filter Kit - This kit allows you to remove the intake filter from the end of the compressor and mount it up to 3' away from the unit. This option makes the compressor easier to install by reducing it's length by 3.25" PART # RFK001

MaxAIR 4.0 - Portable Version

PART # MX401

The MaxAIR 4.0 Portable includes all of the features of the Hardmount and comes in a totally portable carrying case. These are great for those with multiple vehicles and for occasions when you need to take air to a disabled vehicle.

Features Include:

Heavy Duty 8 ft. #6 AWG Battery Cables with glow in the dark Battery Clips
25 ft. Coiled airhose with a clip-on tire chuck.
On/Off Switch

The compressor's portability allows you to use it with any vehicle. Throw it in your 4X4 for the trail or in the family car for a road trip and never fear flat tires again. Simply connect the battery cables and start inflating!

AVAILABLE NOW!

MaxAIR 1.0 - Hardmount Version

PART # MX102

The MaxAIR 1.0 is the little brother to the MaxAIR 4.0 and is ideal for those with very little mounting space available, smaller tires or tight budgets! Features include:

1.23 CFM flow @ 0 PSI - FAST FOR IT'S SIZE!
50% Duty - RELIABLE!
150 PSI Maximum Pressure - HIGH PRESSURE!
Compact Size - FITS ALMOST ANYWHERE!
Pre-installed Circuit Breaker - EASY INSTALLATION!

Use this compressor with or without an air tank.

Recommended Accessories:

Braided Steel Leader Hose - Reduces outlet temperature preventing melting of nylon filler hose or plumbing. PART # LH001
3/8" Check Valve - Prevents backflow through compressor. Recommended for all applications using a tank. PART # CV001
Pressure Switch - Turns off the compressor when tank or line pressure reaches a set pressure. Recommended for all applications using a tank. PART # PS135
Tank Installation Kit - Includes all of the parts required to properly set up your on-board air system. (Tank not included) Coming Soon!

Click to view the installation diagram for a system including a tank

MaxAIR 1.0 - Portable Version

COMING SOON!

PART # MX101

The MaxAIR 1.0 Portable includes all of the features of the Hardmount and comes with a carrying case allowing you to use it with any vehicle. Simply connect the battery cables and start inflating!

COMING SOON.......

OASIS 3000 SERIES AIR COMPRESSORS

Introducing the XD3000™ (Extreme Duty) and HP3000™ (High-Performance) The ultimate commercial-duty DC compressors • Sealed-Impermeable compressor lubrication system, virtually eliminating outside contaminants and oil emissions • Anti Blow By Design-Oil Control Piston Rings developed by Climate Control, a division of T/CCI Manufacturing, and Perfect Circle, minimize crankcase lubrication discharge into compressed air supply. • Positive Crankcase Vent (PCV) - Works with oil control rings and internal oil reservoir to reduce oil consumption. • Internal oil Reservoir-internal capacity for oil overflow. • Oil Level Sight Glass-For quick visual lubricant check.

OASIS AIR COMPRESSORS have been developed, tested and proven to be the fastest... most powerful 12v/24v DC Air Compressors available today. They are built to meet the most rugged requirements for service trucks and contractors. To get this high level of performance, we use only premium Prestolite motors - motors that also see duty running winches and hydraulic pumps. We directly couple these motors to specially designed 10 ci, twin cylinder York air compressors, to which we add our own state of the art control electronics.

These models feature LOW VOLTAGE CUT-OFF PROTECTION and ADVANCED OIL CONTROL. The low voltage cut off protection allows the compressors to deliver up to 200 psi @ 12vdc. Because low voltage, under high load, can damage a compressor motor, we have developed built in electronics with an indicator and automatic shut off to protects the motor. Advanced oil control means the service interval to check the oil level has been significantly increased to only once every 50 hours of operation. And we provide convenient oil sight glass to check it with - no more dipstick!

Both HP3000™ and XD3000™ air compressors operate from 12v DC to 24v DC where they outperform the standard Shop air compressor. These heavy-duty compressors are ideal for field service work where time is money.

Oasis HP3000

THE HP3000™ uses a 4.5” diameter motor that develops 2.5 Hp at 12Vdc. and 5Hp at 24Vdc. Tests at 12v have shown outputs from 8 CFM @ 100 ps, with a maximum pressure of 125psi. The HP3000™ employs a unique high-output design that operates on standard vehicle electrical systems yet consumes no more power than other compressors for the same task. The motor is thermally protected.

While outperforming all others, the HP3000™ Air Compressor is compact - 17”L x 7”W x 10”H, weighs 45 lbs, and comes with 10’ of #4AWG power cable. The unit mounts almost anywhere on any vehicle and can even be used as a portable

PART # HP3000 Duty Cycle 30% @ 12vdc

Dimensions	Wt.	Motor Type	Max Load Amps	Max psi	Psi	CFM	Current
17"Lx7"Wx10"H	45 lbs	Series wound	200 @ 12vdc	200	0 50 100	14 9 8	120 150 180

Oasis XD3000

THE XD3000™ (EXTREME DUTY) version is designed for extended duty cycles. The “XD” utilizes a modified 5” diameter motor with a cooling fan to dramatically extend the run-time by reducing heat buildup in the motor. Tests have shown a 90% duty cycle.

PART# XD3000 Duty Cycle 90% @ 12vdc

Dimensions	Wt.	Motor Type	Max Load Amps	Max psi	Psi	CFM	Current
20"Lx7"Wx10"H	62lbs	Series wound	180@12vdc	200	0 50 100	14 9 8	90 115 130





	Copyright 4WD Products 2004