|
|
|
|
|
|
|
|
|
|
||
|
Light Mount Brackets |
||
 |
Our Light Mount Brackets provide a great location for mounting
auxiliary lights on your Jeep. These brackets are installed directly
over the factory windshield hinges and bolt on using the factory
hardware. Made from Black Powder Coated Steel and are sold in pairs.
Fits all 1997 and newer TJ (Wrangler)
|
 |
| PART # LM002 | ||
|
|
||
|
Mirror Relocation Brackets |
||
 |
Summertime
and extreme wheelin' is better with the doors removed from your
Jeep. Unfortunately, when you remove the doors, the mirrors go with
them. Our Mirror Relocation Brackets allow for re-installation of
the factory mirrors in a new location! Constructed of steel with black powder-coat. Sold in Pairs.
|
 |
| PART # MRB002 | ||
|
New Style Mirror Relocation Brackets! |
||
 |
In 2003 Jeep
changed the design of their mirrors. These new Mirror Relocation
Brackets allow for re-installation of the entire mirror assembly and
retains the snap-back features of the factory mirrors! Constructed of steel with black powder-coat. Sold in Pairs. Fits all Jeep TJ (Wrangler) 1997 and later.
|
 |
| PART # MRB003 | ||
|
|
||
|
Heavy Duty Rocker Guards |
||
|
Coming Soon! |
||
|
|
||
|
|
||
|
Billet Soft Top Disconnects |
||
 |
All Jeep TJ's
come with cheap plastic soft-top parts that are prone to breakage
and stripping of the threads. Our stout billet parts are
bullet-proof and allow for fast and easy removal of the entire
soft-top assembly. Sold in complete sets of 4 with all necessary installation hardware.
|
 |
| PART # STD001 | ||
|
|
||
|
ACOS tm Front Adjustable Coil Spacers |
||
 Photo courtesy: JKS MFG |
The "Adjustable Coil Over Spacer" or "ACOS™" system allows you to easily fine tune or adjust your suspension system to accommodate the added weight of bumpers, winches, sagging springs or tire size changes. The system allows you to level the vehicle front-to-back, or side-to-side. There is a minimum of 1.25" of lift built into the "ACOS™" system and allows for a maximum of 4-1/2" lift. Fits all TJ-Sold in Pairs.
|
|
| PART # 4WD-OGS2200 | ||
|
|
||
| ACOS tm Rear Adjustable Coil Spacers | ||
|
Photo courtesy: JKS MFG |
The "Adjustable Coil Over Spacer" or "ACOS™" system for the rear
fits Jeep TJ only. The Rear "ACOS™" provides a minimum of 1.25" of
lift and a max adjustment of 2.5". Welding required for installation
|
|
| PART # 4WD-OGS2550 (FITS 1997 & UP TJ ONLY) | ||
|
|
||
|
Rear Track Bar |
||
 Photo courtesy: JKS MFG |
||
|
This front trackbar will allow you to easily center your axle under your Jeep. A perfectly centered axle is important for proper steering and "Quick Disconnect" operation. The body of our trackbar is made from 1.25" x .156 DOM tubing, bent to proper angles for various lifts. A rebuildable "johnny joint" is used at the frame end, which is also greasable. A tapered sleeve is then provided to fill the remaining taper. At the axle end you will find a zinc plated adjuster using the factory OEM style rubber bushing to reduce bushing "noise" transfer. The body is then flat black powder coated for corrosion protection.
|
||
| PART # 4WD-OGS 125 - (Fits TJ w/4" Lift or more) | ||
| PART # 4WD-OGS 156 - ('97 & Up TJ Rear Trackbar W/Axle Bracket Note: Requires 3" Lift or more) | ||
| PART # 4WD-OGS 156A - ('97 & Up TJ Rear Trackbar W/O Axle Bracket Note: Requires Modification to OEM Bracket) | ||
|
|
||
|
Mini Skids |
||
 Photo courtesy: JKS MFG |
Designed to be welded to the front OEM lower control arm brackets. When welded on, they will add much needed strength to the brackets and act as a skid plate to protect the brackets and control arm bushings from rock damage. They are made from 1/4” thick plate and come in raw steel form as they do need to be welded in place.
|
 Photo courtesy: JKS MFG |
|
Part # 4WD-OGS115 Fits: XJ, TJ, and ZJ front axles, all productions years |
||
|
|
||
| Jeep TJ Package - 2002 and Older | ||
|
|
|
Light Mount Brackets Fits all 1997 and newer TJ (Wrangler) PART # LM002
Mirror Relocation Brackets Fits All TJ from 1997 thru 2002. (Note: Snap -back feature of mirrors is not retained with these brackets)PART # MRB002
Billet Soft Top Disconnects All Jeep TJ's come with cheap plastic soft-top parts that are prone to breakage and stripping of the threads. Our stout billet parts are bullet-proof and allow for fast and easy removal of the entire soft-top assembly.Sold in complete sets of 4 with all necessary installation hardware. PART # STD001
|
| Regular Price $109.97 Buy all three for only $ 79.00 | ||
|
|
||
| Jeep TJ Package - 2003 and Newer | ||
|
|
|
Light Mount Brackets Fits all 1997 and newer TJ (Wrangler) PART # LM002
Mirror Relocation Brackets In 2003 Jeep changed the design of their mirrors. These new Mirror Relocation Brackets allow for re-installation of the entire mirror assembly and retains the snap-back features of the factory mirrors! Fits all Jeep TJ (Wrangler) 1997 and later. PART # MRB003
Billet Soft Top Disconnects All Jeep TJ's come with cheap plastic soft-top parts that are prone to breakage and stripping of the threads. Our stout billet parts are bullet-proof and allow for fast and easy removal of the entire soft-top assembly.Sold in complete sets of 4 with all necessary installation hardware. PART # STD001
|
| Regular Price $109.97 Buy all three for only $ 79.00 | ||
|
|
|
|
|
|
||
|
Copyright 4WD Products 2004
|
||
Made in U.S.A.
